These pumps are suitable for handing clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.

They are extremely reliable, light, economic and simple to use, finding many uses in domestic applications, in particular the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient main water pressure.

These pumps should be installed in a covered area, protected against the weather.

STRUCTURAL CHARACTERISTICS

> Cast iron PUMP BODY

> Aluminum MOTOR BRACKET

> Brass IMPELLER, with radial peripheral blades, floating on the shaft.

> Ceramic and graphite MECHANICAL SEAL

> MOTOR: the pumps are coupled directly to an asynchronous, high efficiency ABLE induction motor of suitable size, which is quiet running, close and externally ventilated, with IM B3 structural shape, suitable for continuous duty. INSULATION class F or B.

The thermal cutout relay ( motor protector ) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector, with connections according to current standards.

> PROTECTION IP44 (IP54 or IP55)

> CONSTRUCTION and SAFETY STANDARDS in compliance with IEC.